nu-x® takes distillate and blends it into a viable suspension fluid like MCT oil. Terpenes are also reintroduced as well as other types of flavoring. The nu-x® CBD disposable vape pen is made of only full-spectrum CBD distillate, terpenes, and MCT oil. NO artificial flavorings, dyes, or additives are in this nu-x® product.
This slurry is then run through vaporization chambers where the ethanol is completely removed through evaporation, leaving a clean and high-yielding, unrefined, hemp plant extract. This hemp plant slurry consists of cannabinoid oils, resins, terpenes, and cannabinoids.
This whole hemp plant slurry can later by refined by short path distillation to create a CBD distillate. The CO2 is then heated, which returns it to a gaseous state. This removes the CO2 from the hemp slurry. This process is used by nu-x®.
Butane hash oil (BHO) extraction is used for creating solid concentrates such as glass, snaps, shatter, crumble, etc. This method is highly volatile and involves pressing whole hemp material into a glass cylinder with a fine mesh held over a second glass chamber. Once packed, a butane torch is affixed to the opposite end of the mesh, and butane is fired into the cylinder. The plant material will release its cannabinoid oils, resins, and terpenes into the second glass chamber, resulting in a viscous distillate material.
What types of CBD products typically use full spectrum distillate?
Full-Spectrum CBD distillate is when all of the cannabinoids found in a whole hemp plant are present in the distillate. A distillate is the first result of extraction from a hemp plant, and is usually from a plant with a large percentage of CBD when making CBD products. Other cannabinoids will be present in a distillate, however, including: CBG, CBC, CBN, and trace THC.
Super-cooled ethanol extraction is where hemp plant material is placed in a chamber and blasted with extremely cold (approximately -40℉) ethanol. This blast of super-cold ethanol shocks the plant materials and causes the oils and chlorophyll matter to be pushed out into a slurry.
There are three common ways to extract CBD from hemp plants in order to produce distillate:
2. CO2 or Supercritical CO2 extraction
nu-x® uses only the purest CBD concentrates and distillates in our products. Our CBD tinctures and Concentrate CBD E-Liquid contain full-spectrum CBD distillate, made from industrial hemp.
CO2 or Supercritical CO2 extraction is where highly pressurized carbon dioxide is released into a chamber filled with ground hemp plant materials. As the CO2 increases in pressure inside the chamber, it becomes supercritical, which is when it exhibits its liquefied state’s characteristics. This in turn pushes the plant’s cannabinoid oils, resins, unevaporated terpenes, and chlorophyll material out of the hemp plant and into a slurry.
The final steps for making this cannabis oil involves the actual cannabis distillation process. Using vacuum pressure and heat, individual cannabinoids and terpenes can be separated from the decarboxylated extract according to their unique boiling points and molecular weights. In a vacuum environment, where the pressure can be strictly controlled, the boiling point of can be achieved at much lower temperatures to help prevent the loss of potency.
As an alternative to vaping or smoking, you can make distillate edibles or topicals. In edibles, distillates provide the desired cannabinoids without any plantlike taste. For edibles prepared at home, the oil should be introduced with low doses, about 5 milligrams or less THC per serving, then slowly increase the dosage for the desired potency and taste. Distillates can be consumed on their own and dropped sublingually, or under the tongue. This type of oil can also work in topicals, which are applied transdermally, or applied to the skin and absorbed.
Distillate is one of the most commonly made types of cannabis oil, often coveted by consumers for its potency. And because it has been stripped of virtually everything other than cannabinoids it is extremely versatile, capable of being consumed on its own or as the base of numerous other cannabis products.
Whether distillate gets you high depends on the precise cannabinoid you’re consuming. The main benefit is that by removing virtually everything except for the desired cannabinoid, the final product is incredibly potent. For that reason, if you’re consuming a THC distillate, you will probably get very high, as the resulting oil will be almost pure THC content. On the other hand, if you’re consuming a CBD distillate, you will tap into the therapeutic benefits of CBD but, because CBD doesn’t produce intoxicating effects, you will not get high.
How is distillate made?
Distillate is a cannabis extract in which the final product has been systematically stripped of all materials and compounds except one specific cannabinoid.
Distillates allow cannabis product manufacturers to separate the various cannabinoids and terpenes, then recombine them into specific ratios. For example, the starting material from a harvest of cannabis plants may not have enough naturally occurring CBD to produce a tincture to help treat anxiety disorders. With distillates, a more accurate CBD-to-THC ratio can be achieved.
Decarboxylation is the process of removing the carboxylic acid from a cannabinoid’s chemical compound. A cannabinoid is decarboxylated when it’s heated to the point of eliminating the carboxylic acid. By removing that acid group, the cannabinoid can readily interact within the body and bind to the receptors in the nervous system — specifically, the cannabinoid type 1 (CB1) and cannabinoid type 2 (CB2) receptors.
Is distillate the same as oil?
Photo by: Gina Coleman/Weedmaps
Manufacturers also use distillates for producing cannabis edibles, both for the ability to portion the cannabinoids and terpenes into precise amounts, as well as for their flavorless quality. Cannabis butter is another common ingredient used for edibles, but it can add a dry, astringent taste. With distillates, manufacturers can have greater control over the taste of their infused edibles.
Considering the complex and intricate relationship many compounds have within any given plant, researchers have been increasingly interested in the interplay of one cannabinoid to another. Naturally, a mixture of distinct cannabinoids that join to the cannabinoid receptors in both our body and brain will affect us differently when compared to isolated forms of any one chemical. And that’s why CBD distillate is causing quite a stir for all the right reasons.
Still, there are many specialised words and phrases attached to various CBD products that leave us unsure about which oils would best suit our needs. And because quality ingredients usually dictate the positive health benefits, the most important questions that need an answer here are: what is CBD isolate and CBD distillate, what’s the difference, and, crucially, how much does it matter?
What is CBD? As we know, CBD is a non-psychoactive cannabinoid, which, unlike THC, can benefit us greatly without any unwanted ‘high’, making it an attractive supplement for those who need to remain focused throughout the day. However, it’s important you search out a brand that can share its Certificate of Analysis with you, guaranteeing their level of THC is completely safe and virtually undetectable. Many inferior CBD products don’t offer the adequate level of testing or proper filtration, which may lead to a failed urine test.
CBD oil benefits
From pain and inflammation to neurological disorders and the quality of our sleep, CBD has been revered in many studies for its promising use in a world which pines for natural yet effective medicine.
15 May What’s the difference between CBD isolate and CBD distillate?
So… What is CBD distillate? CBD distillate is high CBD hemp concentrate that has gone through a distillation process to remove THC , while working to keep as much — or as little — of the other cannabinoids and terpenes in the concentrate as possible. Distillation is the purifying of a liquid by a process of heating and/or cooling, a process which can carefully be manipulated to create the perfect blend of chosen compounds for the desired effect.