How long does it take to germinate cannabis seeds? When to transplant seedlings? When to start vegging and flowering? Grow your knowledge about the lifecycle of the cannabis plant. Have you ever heard of viviparity? This phenomenon, seemingly uncommon in plants, is actually more widespread than it appears, depending on the enviro Breeders focus on plant characteristics when breeding cannabis seeds such as their potency, flavor, yield, smell, resistance to pests, color, growth stature and other characteristics.
Cannabis growth stages breakdown
Growing cannabis can seem easier when the process is broken down into the 4 main cannabis growth stages. These are the cannabis seed germination, seedling, veg and bloom. At each stage the requirements for nutrients, light and water will vary. The experienced cannabis grower will know how to give the right environmental conditions at each of the stages of cannabis growth. However cannabis plants will always teach you something new to improve the way you grow. Dive into this guide to learn all you should know about the life cycle of cannabis!
|●||How long is a cannabis full grow cycle on average?|
|●||Cannabis germination stage (2-10 days)|
|●||Cannabis seedling stage (2-3 weeks)|
|●||Cannabis vegetative stage (3-15 weeks)|
|●||Cannabis flowering stage (7-14 weeks)|
|●||Other important cannabis life cycle considerations|
How long is a cannabis full grow cycle on average?
There are 4 main stages of the cannabis life cycle as it transitions from seed to harvest. Germination is often defined as the time taken from planting the cannabis seed to the point where it has produced it’s first cotyledon leaf pair. These are the first ‘baby’ (non-serrated) leaf set which is formed as the seed germinates.
|Cannabis growth stages||Average duration|
|Germination stage||2-10 days|
|Seedling stage||1-3 weeks|
|Vegetative stage||1-15 weeks|
|Flowering stage||7-14 weeks*|
The cannabis plant life cycle for a fast growing autoflower seed variety such as as Auto Blueberry or Auto Blackberry Kush could be as little as 9 weeks from seed to harvest.
Or it could be a 6 months cannabis life cycle for an outdoor seed variety. The indoor cannabis grower has full control over their plants and the environment. This allows indoor feminised seed growers to dictate the length of vegetative growth, which in turn will affect final plant size, yield and overall life cycle.
The length of the cannabis full grow cycle will depend on your choice of cannabis seeds (autoflower seeds vs feminised seeds) and whether you grow them indoors or outdoors.
|Autoflower seed vs feminised seed outdoor cannabis growing|
Cannabis germination stage (2-10 days)
Cannabis seeds are typically small, hard and dry. The colours vary from light to dark brown. The first cannabis plant stages take place after the seed has germinated. During seed germination the shell of the seed is initially softened by the moist germination conditions. It’s important to provide moist, but never soaked, conditions for cannabis seed germination in order to achieve maximum germination rates from your precious seeds.
Cannabis seeds should be germinated in dark conditions and don’t need any nutrients initially. Water is sufficient for the first few days. The tap root will emerge from the cannabis seed and grow downwards. The first set of cotyledon leaves will emerge and the cannabis grow cycle has begun! Note that these leaves don’t have the ‘normal’ serrated edges which you will see on all subsequent leaves. As all this is happening the cannabis root system starts to form.
It can take around 2-10 days for seed germination to occur. Occasionally, cannabis seeds can take up to 2 weeks to germinate. Eventually you will see the first set of ‘true’ cannabis leaves with serrated edges appear. For many growers, this represents the end of the cannabis germination stage and the start of the seedling stage.
|Dark vs white cannabis seed germination test|
How long does it take to germinate cannabis seeds?
It can vary from one cannabis seed to another. Usually you can expect seeds to germinate somewhere around 2-10 days after you begin the germination process. Occasionally you can get cannabis seeds to germinate in just one day. Sometimes it can take around 2 weeks. But usually you can expect to wait around 2-10 days for your cannabis seeds to germinate.
Can you speed up the germination process?
Not really. You need to provide good cannabis seed germination conditions and then wait for nature to do her work. If you have bought good quality cannabis seeds from a proven supplier than you can expect cannabis seed germination rates of 90%+.
Many growers have accidentally killed their plants during germination by trying to speed things up by a day or two. It definitely isn’t recommended to e.g. sand-paper your seeds to reduce the shell thickness in an attempt to speed up germination. Nor is it recommended to try to force the shell off the plant during germination. Instead, just be patient and allow the cannabis genetics to do their work.
When to transplant cannabis seedlings?
If you have germinated your cannabis seeds with the moist cotton pad method then you will simply place the germinated seedlings in your grow medium (e.g. soil or coco fibre) or your grow system (e.g. DWC or NFT hydroponic system).
Many growers that use e.g. autoflowering cannabis seeds will simply put their seedling into the final grow container. This avoids the need to repeatedly transplant the seedling to progressively larger containers. In the case of an autoflower strain with a limited lifetime, this process allows the auto to focus all the available time on growth. No plant time is spent adapting during repeated transplants, allowing your auto to reach maximum potential.
Those that grow photoperiod feminised seeds indoors can choose when the blooming process starts simply by reducing daylight hours. That gives them more time to spend progressively potting up and transplanting into gradually larger containers if they wish.
|Cotton pads germination video tutorial|
Cannabis seedling stage (2-3 weeks)
For the next 2-3 weeks after germination, the cannabis seedling will grow. The cannabis root system is essential for healthy growth and development. Experienced growers aim to deliver fully optimised grow conditions in order to maximise root growth. Give the roots waterlogged cold soil and they won’t grow well, this may result in a permanently stunted plant.
Above ground, the cannabis seedling will continue to grow. With each new set of leaves you may notice progressively more ‘blades’ or fingers on the leaves. Initially you may see 3 fingers, then 5 or 7 etc. During the life cycle of cannabis, the seedling needs less water and nutrition than it does in subsequent veg growth and flowering stages. This is one of the most delicate cannabis growing stages. The seedling needs little water and minimal nutrients.
If growing in light mix soil there you may not need to consider any grow nutrients until a week after the first set of serrated leaves emerge. Generally, a light mix soil has enough nutrition for the first couple of weeks after cannabis seed germination. After that many growers use root stimulator and grow nutrients.
If you are growing in hydroponics or coco fibre you may already be carefully using very light nutrients on young seedlings. You may prefer to use specialist low strength seedling nutrients at this stage. The goal is to keep the cannabis seedling in the nutrient sweet spot without over feeding or underfeeding. If seedlings are given excessive nutrients it can ‘burn’ the plant, permanently limiting future growth.
|Everything you need to know about cannabis roots|
How long does the cannabis seedling stage last?
Many growers consider the first 2-3 weeks after germination to be the cannabis seedling stage. These are the first couple of weeks where the seedling is most vulnerable. The seedling may only be a few inches/cm tall with a couple of sets of true (non-cotyledon) leaves.
Lighting levels don’t need to be particularly intense for cannabis seedlings, for the technically minded PPFD levels of 200-400 should be adequate. Many use T5 fluorescent tubes for cannabis seedling lighting. The delicate young seedling leaf tissue can be damaged by the intense light levels which you will need in later cannabis flowering stages.
If you do see your cannabis seedlings stretching a little too much it can help to reduce the distance between the plants and the light. With higher light intensities, the stretching should reduce. If your seedling suffer elongated stems you can gently prop up your seedling with some small wooden supports, such as toothpicks (or similar)
What does a healthy cannabis seedling look like?
You can expect a short, squat plant. The cotyledon leaves will be small in comparison to the emerging ‘true’ leaves and you will notice new leaf sets emerging from the central growing point of your plant (the ‘apex’). The colour should be a vibrant green. Any signs of yellowing is a signal that something is wrong. If your seedling has brown leaf tips it’s a sign that you have overfed your seedlings and ‘burned’ the plant. This is never a good sign and can temporarily or permanently restrict future growth.
If you have a healthy cannabis seedling it will have all the basics in place for future growth. The roots should have the space and nutrients/minerals required to grow a larger frame. The leaves will be ready to grow and absorb more light which will power future photosynthesis. Your plant is set for vegetative growth and will be ready for more light, nutrients and water.
Autoflower seed growers may already have their plant in the final grow container at this stage.
|Top 10 germination and seedling mistakes|
Cannabis vegetative stage (3-15 weeks)
Vegetative growth is the indoor cannabis growing stage where roots, branches and leaves grow but no buds are formed. Indoor growers often use 18-24 hours of daily light whether they are using autoflower seeds or photoperiod feminised cannabis seeds.
During vegetative growth the cannabis plants gradually grow in both height and width. Nitrogen rich nutrients are particularly useful in the vegetative growth stage. The first sets of cannabis leaves grow gradually larger and new leaf sets are formed. As the plant grows it’s requirements for nutrients, water and light will all increase. Light levels can be increased from around 200 PPFD to nearer 400-600 PPFD – your light manufacturer should be able to detail the PPFD levels at various hanging heights.
How long should a cannabis plant stay in veg?
Those growing photoperiod feminised cannabis seeds can select the length of the vegetative growth stage. Often it’s around 4-6 weeks for many growers. But some growers, e.g. SCROG growers (Screen Of Green method), prefer very long periods of ‘veg’ growth, in extreme cases up to 15 weeks or so. However, SOG growers (Sea Of Green method), may not give their plants any veg growth and instead put them straight into bloom conditions.
Those growing autoflower seeds will not be able to dictate the length of the vegetative growth phase. Instead the autoflower seed genetics will determine the point at which it automatically transitions from veg to bloom. It does this without any change or alteration to the light cycle. Autoflowering cannabis seeds grow from seed to harvest under the same light cycle, typically 20 hours of daily light. Photoperiod feminised cannabis strains only commence bloom when indoor light hours are reduced to 12 per day.
|SOG vs SCROG cannabis growing|
How does a healthy cannabis plant in veg look like?
Much depends on the length of time the plant has been in the vegetative growth stage for. A feminised strain with 15 weeks of veg growth could have filled a very large SCROG screen. Whereas an autoflower plant in veg may be perhaps 10-20cm tall, perhaps 3 weeks old and ready to start stretching once bloom begins. Much depends on your cannabis genetics and grow style. But you can expect to see a medium-sized plant with healthy green foliage, but no buds.
Why does my cannabis plant want to flower in the vegetative stage?
The cannabis flowering stage follows veg growth. Cannabis plants are genetically geared towards bloom. It’s the only chance for cannabis to produce seeds and produce the next generation of plants. You may see pre-flowers at the nodes between the stem and branches. Autoflower genetics don’t hold back. As soon as they are ready, autos start to transition from veg to bloom. During this process the auto exhibits features of both veg and bloom.
Cannabis flowering stage (7-14 weeks)
During the cannabis flowering stages, the female plant produces buds and resin. The flowering stage follows the vegetative growth stage. When growing autoflowering cannabis seeds, the transition from the vegetative stage to the flowering stage happens automatically (hence the name, autoflowering).
When growing photoperiod feminised cannabis seeds, bloom begins indoors when the daily light hours are decreased to 12. Outdoors, feminised strains sense the shortened daylight hours as autumn/fall approaches and bloom begins. However if you are growing at equatorial regions the plants can sense the short days immediately.
During the cannabis flowering stage, the plant will require gradually increased levels of nutrients and water. Phosphorus will be required in greater quantities as the plant biochemistry changes. During the cannabis flowering stage the plant biomass can increase dramatically.
Intense light levels can be used in bloom, often with PPFD levels of 600-900. More light can deliver heavier yields. Some professional cannabis growers used PPFD levels of around/over 1000 and may also supplement with Carbon Dioxide to further boost yields.
The length of the flowering stage depends on the genetics. 7 weeks of bloom is required by fast flowering indica strains such as Bubba Island Kush seeds. But a slow blooming Haze may require upwards of 14 weeks in bloom.
The following cannabis flowering stages are shown in week by week pictures, below.
How to tell if a cannabis plant is ready to bloom?
Knowing when your plant is ready to be flipped from veg growth to bloom is one of the most important decisions you will make. But first you may wish to consider a few points related to the timing of the cannabis flowering stage.
• The height of your grow room may be a limiting factor. If you have restricted vertical growing space you may prefer to have minimal veg time.
• Are you growing indica or sativa cannabis seeds? Sativa strains may stretch dramatically during bloom. Take this into account when deciding if your cannabis plant is ready to bloom.
• Growing clones or seeds? Clones don’t always have well established root systems and can take a while to create one before being flipped into bloom.
• Outdoor plants can also be forced into early bloom if you have a greenhouse equipped with blackout blinds. Otherwise, they will choose their own moment to bloom as daylight hours shorten.
• Which growing method are you using? If using the SCROG method you may wish to wait and give the plant a long veg stage. If using the SOG method you may want to offer minimal veg time or even none at all and grow from seed to harvest under 12/12 light
• Which region/climate are you growing in? If you’re growing in tropical equatorial regions you may want the most sativa dominant strains with the most stretch. That’s because the plants go into flowering more-or-less immediately. In more temperate climates, the plants commence bloom as daylight hours shorten. For Northern Hemisphere growers (Europe, USA etc) this often happens around August.
|Power Plant grown from seed to harvest under 12/12 light|
How long does it take for cannabis to start blooming after switching the light cycle?
Once you switch the light cycle to 12/12 (12 hours of daily light) the plant undergoes plant hormone changes as it senses the shorter days.
The plant hormones cause the plant to prepare for bloom. Over the following week or so you will see the changes on the cannabis plant as she gets ready to stretch and produce flowers. You may see female pre-flowers producing a couple of pistils (hairs) at the node between the stem and a branch.
However you can expect to wait 1-2 weeks before you start to see flowers starting to appear. With certain sativa and hybrid strains it can take 3-6 weeks before any significant flower formation.
How does a healthy cannabis plant in flowering look like?
Initially you may notice areas of light green foliage at the eventual points where buds will eventually form. You may also notice the plants stretching, with increased internodal distance.
Growers monitor their cannabis flowering stages week by week. Some like to consider the cannabis flowering stage as 3 separate mini-phases; early bloom, mid bloom and late bloom. As your cannabis plant flowers the weight of buds and resin should increase as harvest point approaches.
During the cannabis flowering stage you will notice that your plant appetite for nutrients reaches maximum as it produces bigger buds and more cannabinoid-containing resin. The ratio of required nutrients will change too. Less Nitrogen (N) is required and increasing amounts of Phosphorus (P) and Potassium (K) are needed to support heavy harvests of compact flowers.
During the first few weeks of bloom your plant will stretch. A sativa may stretch to 2-3 times the height it was at the end of veg. You will see increasing amounts of pistils being produced and the buds start to form and eventually fatten up. After around 5 weeks of bloom the cannabis plants have generally stopped stretching and the buds start to get larger.
As harvest approaches, the pistils start appearing as orange rather than white.
How to tell when your cannabis buds are ready for harvest?
Your cannabis seed supplier should give an indication of the approximate length of the flowering stage. This is a guideline rather than a fixed rule and it may indicate the typical earliest harvest point rather than the recommended harvest time.
Environmental conditions and the specific phenotype will determine the actual harvest date. In addition, you may have a preference for early, mid or late harvested buds.
There are various cannabis bud growth stages. They start small and gradually pack on weight and resin as they grow. Some growers like the slightly heavy effects (and more generous yields) offered by allowing the buds a week or two extra in bloom.
There are different cannabis trichomes stages to consider. Immature buds tend to have clear trichomes. As the buds approach harvest the trichomes become cloudy and eventually start to produce amber (or even red) colourations. Many harvest their buds as the trichomes are transitioning from clear to cloudy.
|Understanding cannabis trichomes|
What to do in case of early or late flowering?
If your plant flowers early you can look forward to an earlier harvest. A late flowering plant will generally have enjoyed more time for veg growth, so you may be able to look forward to a heavier harvest.
When growing autoflower seeds you may find some plants will be ready to harvest a week or two before the slower phenotypes. Remember each plant is different. Try to time the harvest so that you have buds of the perfect maturity level for your personal tastes. Some growers love the lively energetic buzz from an early harvested plant. Other growers will always wait an extra couple of weeks to ensure that their plants have a high proportion of amber trichomes which can produce heavier effects.
What really matters to the home grower is that they:
• are growing the best cannabis seeds for them personal needs and,
• they select the optimised harvest date which provides maximum enjoyment and satisfaction for their recreational or medical needs.
Other important cannabis life cycle considerations
There are different cannabis growth stages as well as different cannabis flowering stages. The experienced grower understands the various environmental, nutrient and lighting requirements at the various stages of cannabis growth.
What stage of growth does cannabis produce trichomes?
This can depend on the specific cannabis seeds being grown. Trichomes can be seen even on young plants though they can be microscopically small. As the plant matures the amount of trichomes increases dramatically. When growing photoperiod feminised cannabis seeds you may see the first trichomes around 3 weeks into bloom. Over the following month trichome production is heavy and gives the plant a frosty appearance, as if sprinkled with sugar.
When growing autoflower seeds, trichome production tends to start around 4 weeks after germination. In the following weeks, trichome production steps up a gear as the buds gain weight. Aroma also increases as more and more trichomes are produced.
What stage of growth does cannabis stop growing?
During flowering, most photoperiod cannabis plants stop stretching after around 4-5 weeks. After that point most of the growth happens on the buds. For autoflower plants, stretch tends to stop around 6-7 weeks after germination. At that point the bulk of the plants energy is focussed on bud growth and resin production.
But it’s worth adding that these figures are only approximate. Much depends on the specific cannabis genetics that you are growing, your environmental conditions and the grow method.
How long should the harvested buds be left to dry?
Harvested buds are typically left for 7-14 days to dry before being transferred to the curing jars. When the branches ‘snap’ (rather than bend) it’s an indication that the plant is dry enough for curing to begin.
How long should the harvested buds be cured?
Many would say that a month or two is a realistic minimum to allow the taste and aromas to fully develop. Keeping your cured buds in jars even longer isn’t an issue. Many people feel that a 6-month cure with your jars in cool/dark conditions is a great way to maximise taste and aroma.
How to keep a consistent cannabis growth timeline?
When growing photoperiod feminised cannabis seeds the growth timeline is up to you. You can offer minimal veg growth for a SOG grow or several months for a SCROG grow.
Autoflower seeds, on the other hand, have a cannabis growth timeline of their own. They, not you, decide when to start blooming. Good quality auto seed suppliers should be able to give you a good idea whether they are likely to have a growth lifecycle as fast as 9 weeks e.g. Auto Blueberry seeds or a slow growth lifecycle of 12-15 weeks e.g. Auto Ultimate seeds. Note that the autos which take longer to grow may well deliver very heavy yields.
Outdoor cannabis growers should note that the different regions you live in can also determine how many daylight hours per day you will have. That will have a huge influence on your outdoor cannabis lifecycle (or growth stages). Equatorial cannabis growers have 12/12 light (or thereabouts) almost all year round. This means you won’t have any veg time at all if you grow outdoors.
Understanding the cannabis growth stages is key
With an increased understanding of the different cannabis growth stages you will find your control and enjoyment of cannabis cultivation will increase. As well as optimising your grow environment and improving your understanding of the cannabis grow cycle be sure to select the best cannabis seeds for your personal grow situation. The choice of cannabis seeds may seem large and possibly confusing.
If so please check out the Dutch Passion Seed Finder which asks a few simple questions before recommending the seeds which best fit your needs.
Viviparity or premature germination of cannabis seeds
Viviparity may be a strange-sounding word, but it actually describes one of the best-known phenomena among mammals (and other species), that of embryos developing inside the mother’s body until the moment of birth, at which point they are already prepared to survive in the outside world. This viviparity, which is so familiar to us humans, is not so frequently found in the plant kingdom, where the embryos are released by the mother plant as a seed and will depend exclusively on the environment to develop and grow.
However, viviparity can also occur in some plants and sometimes, the seed that would normally wait to be released begins to grow in the mother’s body and emerges to the surface like an alien unleashed. The result? Plants that seem like something from a horror movie but that are, in reality, premature mothers.
Plants with a tendency to viviparity
Viviparity in plants is not common, but there are some exceptions. In the plant kingdom, several species with a tendency to viviparity have been documented, such as:
- Red Mangrove.
- Plants growing in flooded areas.
For example, some species of mangroves grow on sediments that are saturated with water by the tides, in addition to having high concentrations of salts and being poor in oxygen, meaning that viviparity gives these species a greater probability of successfully rooting in the harsh substrate and to be able to survive to develop and form mangroves.
Red mangroves (and other mangroves) are viviparous: the seed germinates while the fruit is still attached to the branches; in addition, the mother will continue to nurture it until it reaches 40 cm in length
Viviparity can also occur in common fruits, such as tomatoes or peppers. The seeds contain a hormone that suppresses the germination process. This is a necessity, as it prevents seeds from germinating when conditions are not favourable and losing the opportunity to grow into plants.
But sometimes this hormone runs out, for example when a tomato sits on the greengrocer’s shelf for too long. And sometimes the hormone can be tricked into thinking the conditions are right, especially if the conditions are hot and humid. This can happen in ears of corn that experience a lot of rain and collect water inside their husks; or on fruits that are not harvested and consumed immediately during a hot, humid summer.
Viviparity often looks like a maggot infestation, which is bad if you want to sell your fruit. Otherwise, it’s perfectly harmless.
Apart from the instances of a mutant-looking tomato or corn on the supermarket shelf, it is believed that 89% of viviparous plant species grow in humid forests or in flooded environments and many are native to the tropics. Environmental conditions, therefore, have a lot to do with the causes of viviparity, as we explain below.
What causes viviparity in plants?
Experts affirm that viviparity arises as a response to factors that are detrimental to the development of embryos in the soil:
- Extreme temperatures.
- Environmental unpredictability.
- Too-dry environments.
- Seed vulnerability to predation.
- Microbial attacks.
In addition to these factors, some studies point to a common cause in plant species that tend to display viviparity: an intolerance to seed desiccation, a key process in the formation of some seeds.
These aren’t mutant strawberries, it is just viviparity that gives them this strange appearance
Viviparity and seed dormancy
The seeds of many species within the plant kingdom are capable of preserving their germinative power for years. This state of metabolic inactivity corresponds to the state of dormancy (or latency) and allows us to collect seeds, package them and store them for a time without fear of them losing their viability or capacity to germinate. Desiccation is a key prerequisite to these seeds entering a dormant state so that they will only germinate in the soil when the environmental conditions are suitable.
However, this process does not occur in viviparous plants, thus allowing plant species from humid or flooded environments, where their seeds are unable to dry out, to generate healthy embryos. As a consequence, their seeds do not enter a state of dormancy and this is why they germinate in the mother’s body once the embryo has formed. In this way, viviparity arises from an environmental adaptation for many plants. But this is not the only reason for viviparity in the plant world.
Mutant plants: another cause of viviparity
Although external factors such as the abundance of water can induce viviparity in some plant species, sometimes genetics is the principal cause of this phenomenon. Genetic mutations in tomato, corn and wheat plants can result in viviparous specimens due to an alteration in their production of phytohormones or a reduction in sensitivity to the phytohormones responsible for inducing the state of dormancy.
Viviparity or premature germination of seeds is a physiological phenomenon present in some cultivated species, such as corn
Viviparity, evolutionary advantage or not?
After everything is said and done, all living beings have the same mission to follow an evolutionary strategy with the aim of perpetuating ourselves as a species. For this reason, many experts argue about the usefulness of viviparity in plants. The arguments against it claim that this phenomenon limits the dispersal capacity of individuals, that when they germinate in the mother plant they will no longer spread to new habitats, meaning that the expansion of the species will be very limited. If something happened to that land where all the plants grow or if the environmental conditions changed, all the specimens of that species would perish and it would end up disappearing.
However, on the list of “pros”, viviparity is a reproductive strategy that favours plants grown in humid environments and also in difficult conditions, in which a developing plant would stand a better chance to establish itself than a seed with its shell.
Alpine poa (Pooideae) is only viviparous when growing with a combination of long days and cool temperatures, otherwise it produces normal seeds
Viviparity in cannabis
Viviparity in cannabis is not a common phenomenon, although it can occur under certain environmental conditions. And when the objective of the crop is not to produce flowers but seeds, the grower or the breeder is in charge of pollinating the flowers of the females that will develop these seeds. Cannabis seed production can be done both indoors and outdoors (and also in greenhouses). In both cases, something similar to viviparity can occur if the environmental factors favour it.
How? Very simple: when the flowers of the female cannabis plant are pollinated, each stigma (the hairs on the buds, the gateway for pollen to enter the plant) that has been fertilised will cause a seed to form inside the pistil. After a few weeks (usually at least four) it may happen that some seeds are fully formed while others still need a few more days to fully mature.
If the cannabis plants are growing in an environment that is too humid, the fully mature seeds start to germinate inside the flower of the mother. In some cases, these seedlings will fall to the ground and begin to develop by rooting in the substrate; while others will develop within the cannabis flower until they die.
Viviparity in cannabis: the climate is so wet in eastern Australia that the seeds sprout before you can harvest them
How do we prevent viviparity in cannabis?
As we already mentioned, when the goal of cultivation is the production of cannabis seeds, viviparity is something that we will definitely want to avoid. For this reason, it is necessary to pay attention to the relative humidity levels of the room or grow tent (in the case of indoor cultivation) and try to keep them ideally below 50% and, above all, ensure that they do not exceed 60%.
This can be a challenge, especially in the flowering phase of the plants, as the plants are fully developed and bushier, so more transpiration occurs, increasing the relative humidity. To reduce humidity levels in indoor crops and prevent seeds from germinating before time, it is recommended to use dehumidifiers.
In outdoor crops, the environmental humidity will depend on the climate of the area, therefore, it is important to know when the autumn rains usually arrive to avoid them at all costs. If the seed-bearing buds get too wet or rained upon directly, the chances of viviparity are high. Therefore, choosing fast-finishing genetics for cold climates, such as those offered by the Early or Fast varieties, can be very useful to prevent this from happening.
These genetics offer all the advantages of feminised or regular strains, reducing their flowering period by a couple of weeks; this means that they will be ready to harvest earlier, which is a great advantage for growers who live in regions with cold climates and short summers, or for those who want to make the maximum number of harvests per year.
- Viviparidad en Goeppertia inocephala (Marantaceae). María Del Pilar Sepúlveda-Nieto, Ángela María Morales Trujillo, Liliana Katinas.
- The Ecology and Physiology of Viviparous and Recalcitrant Seeds. Elizabeth J. Farnsworth.
The articles published by Alchimiaweb, S.L. are reserved for adult clients only. We would like to remind our customers that cannabis seeds are not listed in the European Community catalogue. They are products intended for genetic conservation and collecting, in no case for cultivation. In some countries it is strictly forbidden to germinate cannabis seeds, other than those authorised by the European Union. We recommend our customers not to infringe the law in any way, we are not responsible for their use.
Grow Smarter & Profitably By Cultivating Your Smarts
Implementing Standardized Cultivation Environments Are Especially Important Since All Problems Impacts Revenue & There’s Little Margin For Error At Scale.
Here’s The “Faces” Of The Cannabis Industry (Retail Dispensary Agents)
Let’s Train Skilled & Talented Dispensary Technicians That Drive a Higher-Quality Retail Experience That Delivers Positive Outcomes With Everyone, Every Time.
” * ” indicates required fields
METRC Tracking System Training
Learn How One Tool Can Manage Your Retails Dispensary Operations, Track Cannabis Taxes & Stay Compliant.
Edibles Are A HOT Topic & You Never Want To Making People Sick!
Our Cannabis Product Manufacturing & Recognized Food Safety Training Covers Everything From Topicals, Edibles to Concentrates & Formulated Products.
” * ” indicates required fields
Calendar & Checklist Training
Replacement Free Trial Coming Soon! It’s Called “Cannabis Infused-Edible Products” (In The Meantime TRY This).
Our Biz Is Actually “Compliance” (We’re Just Lucky To Sell Cannabis)
There’s Always That “Un-Fun Thing” With Any Job & Our Compliance Training Provides What’s REQUIRED to Be Compliant & Conduct Commercial Activities.
” * ” indicates required fields
COVID Cannabis Industry Safety
During COVID-19 Pandemic a 9-Letter Word Was a “Game-Changer” for Our Legal Cannabis Industry: “Essential.”
Cannabis Topics, What’s New
Breeding Cannabis Seeds
Step #1 For Cannabis Seeds
You will want to begin by choosing parents for breeding cannabis seeds. Selecting the female plants for breeding is much easier than selecting male plants.
Breeders focus on plant characteristics such as their potency, flavor, yield, smell, resistance to pests, color, growth stature and other characteristics when choosing a female to breed cannabis seeds.
Choosing male plants is not easy since males don’t reveal their characteristics like females do. Some breeders will rub their fingers on the male plants stem to be able to better smell their resinous odor. The best way to test for male characteristics is by a progeny test where the male pollen is harvested and then placed on certain plants.
These plants will create seeds and the next season those seeds are planted then grow up to show off their characteristics. Once a male plant is selected for breeding the other male plants are then cut down and destroyed.
Step #2 Is Collecting Pollen
You will collect pollen from the male plant that you have chosen and strip away all extra male branches to guard against random pollination then isolate the male as soon as anthers show. Before the anther’s open, you will place a plastic bag over the branch and tie it to prevent it from falling.
You will keep the bag over the branch for several days to collect pollen then carefully remove the branch and bag so pollen does not escape from the bag.
Step #3 Storing Cannabis Seeds’ Pollen
You can now either store the male pollen indoors since pollen in a natural condition in the wild will not last for long. Be sure that the storage container that the pollen is stored at low temperatures and moisture since as high temperatures, as well as humidity, will destroy pollen very quickly.
Pollen that is harvested can be stored for several months when it is stored in a freezer. To store pollen in the freezer you will first need to use a fine screen to filter out the plant leaf matter from the anthers that may have fallen into the bag.
If these are not removed it can contaminate the pollen and cause it to spoil. Before you filter the plant material you will want to lay down some wax paper or place a plate that is clean to capture the falling pollen.
You can then place the pollen in a sterile container, tube or sealed bag to make sure that the pollen for cannabis seeds is clean and sterile. When you are freezing the harvested pollen you will not want to continually freeze and thaw it out since this will diminish the viability of the pollen. Use only what is needed and leave the rest frozen.
Step #4 Using Pollen For Cannabis Seeds
Pollination occurs when male pollen comes into contact with the female pistil. Depending on which plant variety you choose to breed the female flowers will be ready to be pollinated within two (2) to twelve (12) weeks after the flowering cycle has been introduced to the plants.
The more pistils that are visible when pollinating then more cannabis seeds will be created. Female pistils that are turgid and most often white or off-white are the best to be pollinated.
Any pistils that are rust- or brown-color are beyond the point that you can fertilize. To pollinate a female plant, you will first cover the female branch with a pollen-filled bag then briefly shake the bag to make sure the pollen makes contact with the female pistils.
You can leave the bag over the branch for two (2) days to ensure pollination occurs. Many times cannabis breeders will contain the male pollen and pollinated-female plants in a separate room to prevent other cannabis plants from being fertilized.
After a few days in the pollination room, the female plant is sprayed with water to destroy the pollen that remains on the plant before the female plant is moved back into the flowering room. This is to prevent any remaining pollen from fertilizing other plants.
Also be sure to spray any room that you have allowed for pollination to occur. Another way to pollinate a female plant is to use a small paintbrush to ‘paint’ pollen onto the pistils for cannabis seeds. You will simply dip the paintbrush into a container of pollen and gently brush the pollen onto a female plant’s flowers.
Be sure that all fans are off to prevent the pollen from being blown around the room. This method is perfect for growers who want to have cannabis seeds created on only a few branches and leave the rest of the female flowers sinsemilla.
After a plant is fertilized the cannabis seeds will be ripe in about six (6) weeks but could be ready earlier. When seeds are mature they will split the calyxes open and make the cannabis seeds visible.
The seeds that are most ripe are seeds that have a dark brown or grey color and well-mottled (tiger striped) and will set loosely within the calyx. Seeds that are not viable and immature will be green, yellow or white in color as well as will be in sealed calyxes.
If you have seeds that are not mature by the end of the plants life-cycle then you can eat the immature cannabis seeds. Plants that are sativa dominant tend to allow seeds to fall from their small, lightly packed buds and while indica dominant plant seeds tend to stay within the large, densely packed buds.
Seeds are harvested from buds by either manually finger-picking each of the seeds out or by crushing the buds to separate the bud from all seeds. Seeds are often tested for their viability with a simple press between your thumb and index finger to test the seeds firmness.
If the seed splits open with this test it means that the seed is not viable or immature. If the seed is very firm then those cannabis seeds will tend to be viable.
Once seeds have broken the calyx then they are ready to plant immediately, if you choose to do so. Otherwise, the seeds may fall off the plant and germinate below the plant.
These ideas and methods are only a guideline for small-scale cannabis seed production. If you plan on producing massive amounts of seeds you will need to adjust what is done to be effective.
Many breeders will clone a male plant so they have multiple-males within a very large room that are able to pollinate many, many females. It all depends on what you plan on doing.
Let us know what you think.
(NOTE: Before you can optimize training, you must do is get a clear picture on WHO is learning, HOW do they make an impact, and WHAT their requirements are. Download our proven “Cannabis Training Optimization Strategy” now and get clear on what’s needed to learn.)